aere-node/RUN-A-NODE.md

Run a node on Aere Network mainnet, chain 2800

This file plus genesis.json plus one bootnode enode (see the bootnodes section below) is everything an outsider needs to bring up a full node that syncs chain 2800 from block 0. Until 2026-08-03 this repository shipped the precompile sources and the NIST vectors but not the chain configuration, so nobody outside the Foundation could actually start a node, and the "verify it yourself" claim the repository is built on could not be exercised end to end.

Nothing here is a key. genesis.json is public chain configuration; a node that nobody can dial is a node nobody can sync from, and the bootnodes section says plainly how dialing works today.

---

The one command

If you have JDK 21 and git, one command verifies the genesis and the registries by sha256, fetches upstream Besu at the named commit, applies the four mainnet patches in order, builds the node, and starts a full node syncing chain 2800 from block 0:

./run-node.sh --bootnode <enode://...@host:port>

That is the whole setup. The script is deterministic and idempotent: it refuses to run if the genesis or the registries do not match their published sha256, it re-uses a build it already made, and re-running it re-applies nothing and rebuilds nothing. It holds no key and signs nothing. It configures a node that VALIDATES chain 2800, including the post-quantum certificate anchor, but does not PRODUCE seals; producing seals needs a validator Falcon key, which is not in this repository and is not required to follow the chain.

./run-node.sh --help              # --data-path, --p2p-port, --rpc-port, --sync-min-peers, --no-start, --rebuild
./run-node.sh --no-start ...      # verify, patch and build, but do not start the node
./run-node.sh --sync-min-peers 1  # on a young network with few reachable peers (Besu's default is 5)

You still need a bootnode enode for discovery (see the bootnodes section below for how to get one today). Everything except peer discovery works without it; if you omit --bootnode the script says so plainly and stops with instructions rather than starting a node that can never find a peer.

Everything the one command does is also written out by hand below, unchanged, for anyone who wants to audit each step rather than run it.

---

The four things you need

What	Where
genesis.json	The genesis file, byte for byte as it sits on the Foundation nodes. sha256 361709dccec4e9fc85be5aec33b30b58a55dc53424087d84c1ad11bd1d944c24 (of the published file with LF line endings, exactly as curl fetches it; a Windows checkout that converts line endings will hash differently)
registries/	The public Falcon validator registries. Without them a node imports fine to block 13,014,000 (the first anchor) and then refuses every anchor block, because it cannot map a certificate's seal indices to validator addresses. See registries/README.md; sha256 of each below.
a bootnode enode	requested by mail for now; see the bootnodes section below
patches/, precompiles/	The Besu fork, see README.md. Needed to sync past block 9,189,161

The registries are public (Falcon public keys and validator addresses, each carrying a proof of possession and an ECDSA claim; no private key material). Their sha256, also in registries/SHA256SUMS:

006b1b3fb814ed84622539160956263faca7c0b76585c22f2e8acb926c0bcb7f  manifest-13014000.json
23736b7d4ba1d3213496f8b5a5f756d5c958b08efebdeb1329b24d7dfa45fb6e  manifest-13600000.json
c9a215d294e106f69fb2f16e3af21f9787523969e4b7260a3098f4b2cf458059  registru-2800-v2-13600000.properties

---

Which Besu

Stock upstream Besu syncs chain 2800 correctly up to block 9,189,161 and then stops being able to follow it. That block is the first with a timestamp at or after activationTime 1783820272, when the five Aere post-quantum precompiles come into existence. A node without them computes a different result for any block containing a call to 0x0AE1 through 0x0AE5 and falls off the chain.

So there are two honest paths:

• Follow the tip. Build the fork: apply patches/0001-aere-pqc-precompiles-mainnet.patch to upstream Besu commit d2032017bb3b8cb215a97303980a1e4a643f7180 and build it. Full instructions, including the pre-image hashes that prove you are on the right base, are in README.md.
• Verify the early chain only. Stock Besu 26.4 or later will import blocks 0 through 9,189,160 from this genesis. That is enough to check the genesis allocation and the sub-second block period transition against what we publish. It is not enough to reach the head.

There is a second Aere change to the client, and it is not in patch 0001: patches/0004-aere-basefee-floor.patch, one file, LondonFeeMarket.java. From block 10,141,734 chain 2800 clamps the EIP-1559 base fee to a floor of 1 Gwei. The patch is fork gated by two JVM system properties and is a byte behaviour no-op when they are unset, so a node that applies it without setting them is stock Besu:

-Daere.basefee.floor.forkBlock=10141734 -Daere.basefee.floor.value=1000000000

Pass those through BESU_OPTS. Apply this patch and set these flags if you want a client that computes what the network computes. It was measured on 2026-08-02 that QBFT and IBFT2 in Besu do not validate the base fee at import at all, upstream or in our fork, so a node without this change is expected to import the chain anyway and only to disagree if it ever proposed a block. That is a finding about a missing upstream rule and not a licence to skip the patch.

Do not apply patches/0002-...-testnet.patch for a mainnet node. It adds 0x0AE6 and 0x0AE7, which are not on mainnet, and a node that has them will not disagree with the chain today but is running a configuration the chain does not.

The post-quantum header anchor: apply patch 0003 to follow the current chain

Since block 13,014,000 every 32nd header of chain 2800 carries a sixth element in its QBFT extraData: a certificate of validator Falcon-512 seals, universal since block 13,889,296 and enforced at a minimum of three seals per anchor block (f+1 of nine) since 2026-08-14. A node rejects an anchor block whose certificate holds fewer than three valid seals. (Correction 2026-08-19: an earlier version of this paragraph said that from block 14,050,000 the network refuses to finalize any block without a post-quantum quorum; the per-block rule armed at that height is retired in the shipped code in favour of the anchor rules and changed no enforcement, so that sentence is withdrawn.)

The anchor ships in this repository both as source, under anchor/, and as patches/0003-aere-pq-anchor.patch. A node built without it has not been shown to import headers past block 13,014,000: the second client needed an explicit change to accept the sixth element, and no floor-only build has been observed following the chain past that height. Apply 0001, 0003, 0004 and 0005 together and treat a build missing any of them as unable to follow the current chain.

Patch 0005 exists because the import proof was actually attempted

Measured 2026-08-15, on a real from-genesis sync of a build from patches 0001+0003+0004 alone: the node followed chain 2800 for 9.18 million blocks and stopped at block 9,189,161, the futureEipsTime activation, with failed persisting block due to stateroot mismatch. Not one cause but two, both in MainnetProtocolSpecs.java, both now carried by patches/0005-aere-eip2935-futureeips.patch: upstream bases the futureEips milestone on the unreleased amsterdam definition (Block Access Lists, a different state-root committer), while chain 2800 isolates it on Osaka; and the fleet activates EIP-2935 historical block hashes in that same fork, one system state write per block from 9,189,161 onward, which a build without the patch never performs. No amount of green unit tests found this; importing the real chain found it in one afternoon.

Measured 2026-08-16: the from-genesis sync reached the live tip. A node built only from these packages imported chain 2800 from block 0 to height 14,088,211 and then followed the head, crossing the 14,050,000 activation height (which, see above, changed no enforcement) with zero anchor rejections. Two more things had to be true for that, both now carried by the patches and both described with their measured boundaries in IMPORT-PROOF-STARE-2026-08-15.md: a historical window (anchor heights 13,267,824 to 13,268,944) in which anchoring was deliberately disarmed fleet-wide, and a recovery window (13,268,976 to 13,890,544) in which proposers legitimately wrote shorter certificates. Inside those windows the header is accepted as carried; outside them nothing changes. The controls run in both directions (641 tests, 0 failures).

Measured 2026-08-15: on a pristine d2032017 checkout, git apply (no flags) accepted 0001, 0003 and 0004 in that order, and ./gradlew --no-daemon installDist -x spotlessJavaCheck -x test exited 0 on JDK 21, producing besu/v26.8-develop-d203201/linux-x86_64/openjdk-java-21. That proves the recipe builds. The import proof above, measured 2026-08-16, proves the build follows the live chain from genesis to the tip. The proof is repeated, not assumed: see IMPORT-PROOF-STARE-2026-08-15.md for the measured heights of each run.

---

The configuration a follower passes (BESU_OPTS)

The Aere fork reads its per-node configuration from JVM system properties passed through the BESU_OPTS environment variable, not from the genesis file. run-node.sh sets these for you; this is what it sets, and what a manual operator must export before the besu command below, or the node will refuse the first anchor at block 13,014,000.

REG=/path/to/aere-node/registries
export BESU_OPTS="\
-Daere.basefee.floor.forkBlock=10141734 \
-Daere.basefee.floor.value=1000000000 \
-Daere.pq.chainId=2800 \
-Daere.pq.anchorBlock=13014000 \
-Daere.pq.anchorInterval=32 \
-Daere.pq.anchor.maxSeals=9 \
-Daere.pq.anchorMinSeals=13014000:0,13034000:3,14961456:6 \
-Daere.pq.anchor.minSealsCeiling=1 \
-Daere.falcon.anchor.address=0x5214F0e53899Dad805ef3AdF0624F5e49d2a5EB5 \
-Daere.falcon.anchor.block=13889290 \
-Daere.falcon.manifest=$REG/manifest-13600000.json \
-Daere.falcon.registry.history=$REG/manifest-13014000.json,$REG/registru-2800-v2-13600000.properties"

Why the seal-threshold ceiling, for a from-genesis node

A node syncing from block 0 starts into the GENESIS validator set, which is small (three validators). The startup threshold guard (PqAnchorThresholdGuard) refuses to arm a seal threshold at or above that set's QBFT quorum, because a proposer at that set size could never gather it. The published schedule reaches K=3 (block 13,034,000) and K=6 (block 14,961,456), both unreachable at N=3, so without aere.pq.anchor.minSealsCeiling a from-genesis node refuses to start with AERE-PQC-THRESHOLD-01. The ceiling lowers the EFFECTIVE threshold to what the genesis set supports (quorum(3) - 1 = 1) WITHOUT editing the published schedule, exactly as that guard's own message instructs (--Xaere-pq-anchor-min-seals-max). It does not weaken the post-quantum binding a follower checks: every anchor must still carry a valid validator Falcon seal that verifies against the registry, and its digest must still bind the certificate under the block hash; only the seal-COUNT floor, which is a proposer-liveness property relative to the current set and not a history-verification property, is relaxed to one. Real anchor blocks carry three to nine seals, so all import cleanly. A validator, which starts into the full set and proposes, does not set this.

This is the FOLLOWER subset, and the distinction is in the code under anchor/, not guessed. A validator additionally passes aere.falcon.key (the signing key), the aere.falcon.attach* and aere.falcon.validatorCount properties (these drive seal PRODUCTION only), and aere.falcon.forkBlock (a per-block Falcon rule the shipped code retires at the anchor block, so it is inert; leaving it unset keeps the non-blocking baseline). What is above is exactly what the IMPORT path reads: the registries (aere.falcon.manifest loads only together with aere.falcon.anchor.address, so those two are registry wiring here, not attach knobs; aere.falcon.registry.history carries every earlier registry the chain was signed against), the anchor-validation schedule (aere.pq.*), and the 1 Gwei base-fee floor live from block 10,141,734.

---

Start it

Export BESU_OPTS as above first, then:

besu \
  --genesis-file=/path/to/aere-node/genesis.json \
  --data-path=/path/to/data \
  --network-id=2800 \
  --sync-mode=FULL \
  --data-storage-format=BONSAI \
  --bootnodes=<the enode you were given> \
  --p2p-port=30303 \
  --rpc-http-enabled --rpc-http-port=8545 \
  --rpc-http-api=ETH,NET,WEB3,QBFT \
  --min-gas-price=0

Bootnodes are deliberately NOT published in this repository yet. The network entry points available today are consensus or origin hosts, and this project does not print the addresses of its own machines in public documents; a dedicated public bootnode, on a host that serves nothing else, is the planned replacement, and this paragraph will then carry its enode. Until then, write to office@aere.network with the subject "bootnode" and you will receive a current enode by return. Everything else on this page works without one; discovery is the only step that needs it.

--sync-mode=FULL is deliberate. Chain 2800 runs QBFT with a half second block period, so the head was about 12.2 million blocks when this was written (2026-08-03), passed 14.6 million on 2026-08-19, and climbs by roughly two per second; read the live height with eth_blockNumber. Full sync from block 0 is the mode that actually verifies the history we publish, which is the point of this repository. Snap sync against a QBFT chain trusts a peer for the state and verifies far less.

--min-gas-price=0 matches the network. Chain 2800 has a real 1 Gwei base fee from block 10,141,734, but the minimum gas price a node will accept into its own pool is a local policy and the Foundation nodes run it at zero.

Outbound and inbound TCP and UDP on your p2p port must be open. Discovery is UDP; a TCP only firewall gives you a node that dials out and is never dialled back.

---

Check that you are on the right chain, before you trust anything else

Two facts settle it. Run these against your own node once it is up.

1. Your block 0 must be the network's block 0.

curl -s -X POST http://127.0.0.1:8545 -H 'content-type: application/json' \
  -d '{"jsonrpc":"2.0","id":1,"method":"eth_getBlockByNumber","params":["0x0",false]}' \
  | grep -o '"hash":"0x[0-9a-f]*"'

Expected, and this is the whole test:

0xd86d57a899cbfa580669f0e1c7cd4ae5f525247c3c823f8f75df176a0c5d7f1a

That hash covers every consensus relevant field in genesis.json, including the state root of the six genesis accounts. If it matches, your genesis file is the network's genesis file and no further comparison of individual fields is needed. If it does not match, your node will never peer, and no amount of correct bootnodes will help.

Compare against the public endpoints, which are separate machines with separate operators of the same file:

curl -s -X POST https://rpc.aere.network  -H 'content-type: application/json' \
  -d '{"jsonrpc":"2.0","id":1,"method":"eth_getBlockByNumber","params":["0x0",false]}'
curl -s -X POST https://rpc2.aere.network -H 'content-type: application/json' \
  -d '{"jsonrpc":"2.0","id":1,"method":"eth_getBlockByNumber","params":["0x0",false]}'

2. You must have peers.

curl -s -X POST http://127.0.0.1:8545 -H 'content-type: application/json' \
  -d '{"jsonrpc":"2.0","id":1,"method":"net_peerCount","params":[]}'

A nonzero answer means discovery worked. Zero after a few minutes means either your UDP port is closed or the bootnode you were given is down; a plain TCP connect to its address distinguishes the two.

---

What the two bootnodes are, and what they are not

They are two full nodes that are not in the validator set. Chain 2800 seals blocks with nine QBFT validators (seven until 2026-08-09), and none of the nine is listed here, on purpose. Publishing a validator's p2p address hands an attacker a target whose downtime costs the network consensus headroom, which is why sentry style architectures exist. The two nodes above carry no consensus responsibility: if both are taken down, new nodes cannot bootstrap until they are replaced, and block production is unaffected.

A written address is not a live address. This file cannot prove the bootnodes are up at the moment you read it; only your own net_peerCount can.

Both were reachable and serving blocks when this file was written. Both are Foundation operated, so this is one operator's word for two addresses. That is a real centralisation fact about chain 2800 today and not a documentation gap.

---

Measured, 2026-08-03

The recipe on this page was executed rather than written. A Besu node with an empty data directory was started from exactly this genesis.json and exactly these two bootnode URLs, on a machine that is not a validator, with --sync-mode=FULL and no static nodes, no other peer hints and no copied database.

• Its own block 0 came out as 0xd86d57a899cbfa580669f0e1c7cd4ae5f525247c3c823f8f75df176a0c5d7f1a, which is the live chain's block 0. That hash covers the state root, so the six accounts in alloc are the network's down to the last wei, and so is every header field in the file.
• It reached 11 peers knowing nothing but the two enode URLs above.
• It imported from block 0 to block 2,221,580 in about thirty minutes, with zero rejected blocks, which carries it through the sub-second block period change at roughly 2,137,652 and out the other side.

The honest limits on that run, stated because they are the difference between this section and an advertisement:

• It was stopped at ~2.2 million rather than carried to the head, so it never reached the precompile fork at 9,189,161 or the base fee floor at 10,141,734. "Reaches the current head" is not measured.
• It ran the Foundation's build of the fork, not a build a third party made from patches/. That those patches build, and that the built precompiles answer the NIST vectors, is measured separately in README.md; that the two together sync to the head is not.
• Nothing here proves the bootnodes will be up when you read this.

---

A number in this file that the chain does not agree with

config.transitions.qbft[0].block reads 2138451. That is the height at which the file says the block period drops from one second to half a second. The chain says otherwise. Sampling header timestamps on the public endpoints puts the change just after 2,137,652. Measured spans of twenty blocks: from 2,137,600 the twenty blocks take 20 s, from 2,137,656 they take 15 s, from 2,137,657 they take 12 s, and from 2,137,700 they take a flat 10 s, which is 500 ms a block and stays there through 2,138,400. The published 2138451 is roughly eight hundred blocks late and describes a boundary that is not in the data.

It is published anyway, unaltered, because this file is the file the network runs and its value as evidence comes from being exactly that. Two things make the discrepancy harmless to you rather than merely tolerated: the field only governs how fast a proposer may seal, so it has no effect on a node that follows; and it was measured, on the sync run described above, that a node carrying this exact value imports the blocks either side of both numbers without rejecting one.

Correcting it means editing a file on live validators, which is a change to running consensus infrastructure and is not made as a side effect of publishing a document.

A note on the comment fields in alloc

The six genesis accounts carry comment strings. No client reads them; they are not consensus data and they are inside the file only because they have always been. Two of them are wrong and are left uncorrected here rather than quietly edited, because this file is published byte for byte as the running nodes hold it: the dash characters are mangled, and the 1,400,000,000 AERE account is labelled "Mining Reserve" although chain 2800 has no mining and never has. It is the staking and emissions reserve. Correcting the text means editing a file on live nodes, which is a change to running infrastructure and is not made as a side effect of a documentation fix.