# Run a node on Aere Network mainnet, chain 2800 This file plus `genesis.json` plus one bootnode enode (see the bootnodes section below) is everything an outsider needs to bring up a full node that syncs chain 2800 from block 0. Until 2026-08-03 this repository shipped the precompile sources and the NIST vectors but not the chain configuration, so nobody outside the Foundation could actually start a node, and the "verify it yourself" claim the repository is built on could not be exercised end to end. Nothing here is a key. `genesis.json` is public chain configuration; a node that nobody can dial is a node nobody can sync from, and the bootnodes section says plainly how dialing works today. --- ## The three things you need | What | Where | |---|---| | `genesis.json` | The genesis file, byte for byte as it sits on the Foundation nodes. sha256 `361709dccec4e9fc85be5aec33b30b58a55dc53424087d84c1ad11bd1d944c24` (of the published file with LF line endings, exactly as `curl` fetches it; a Windows checkout that converts line endings will hash differently) | | a bootnode enode | requested by mail for now; see the bootnodes section below | | `patches/`, `precompiles/` | The Besu fork, see `README.md`. Needed to sync past block 9,189,161 | --- ## Which Besu Stock upstream Besu syncs chain 2800 correctly up to block **9,189,161** and then stops being able to follow it. That block is the first with a timestamp at or after `activationTime` 1783820272, when the five Aere post-quantum precompiles come into existence. A node without them computes a different result for any block containing a call to `0x0AE1` through `0x0AE5` and falls off the chain. So there are two honest paths: - **Follow the tip.** Build the fork: apply `patches/0001-aere-pqc-precompiles-mainnet.patch` to upstream Besu commit `d2032017bb3b8cb215a97303980a1e4a643f7180` and build it. Full instructions, including the pre-image hashes that prove you are on the right base, are in `README.md`. - **Verify the early chain only.** Stock Besu 26.4 or later will import blocks 0 through 9,189,160 from this genesis. That is enough to check the genesis allocation and the sub-second block period transition against what we publish. It is not enough to reach the head. There is a second Aere change to the client, and it is not in patch `0001`: `patches/0004-aere-basefee-floor.patch`, one file, `LondonFeeMarket.java`. From block **10,141,734** chain 2800 clamps the EIP-1559 base fee to a floor of 1 Gwei. The patch is fork gated by two JVM system properties and is a byte behaviour no-op when they are unset, so a node that applies it without setting them is stock Besu: ``` -Daere.basefee.floor.forkBlock=10141734 -Daere.basefee.floor.value=1000000000 ``` Pass those through `BESU_OPTS`. Apply this patch and set these flags if you want a client that computes what the network computes. It was measured on 2026-08-02 that QBFT and IBFT2 in Besu do not validate the base fee at import at all, upstream or in our fork, so a node without this change is expected to import the chain anyway and only to disagree if it ever proposed a block. That is a finding about a missing upstream rule and not a licence to skip the patch. Do not apply `patches/0002-...-testnet.patch` for a mainnet node. It adds `0x0AE6` and `0x0AE7`, which are not on mainnet, and a node that has them will not disagree with the chain today but is running a configuration the chain does not. ## The post-quantum header anchor: apply patch 0003 to follow the current chain Since block 13,014,000 every 32nd header of chain 2800 carries a sixth element in its QBFT `extraData`: a certificate of validator Falcon-512 seals, universal since block 13,889,296 and enforced at a minimum of three seals per anchor block (f+1 of nine) since 2026-08-14. A node rejects an anchor block whose certificate holds fewer than three valid seals. (Correction 2026-08-19: an earlier version of this paragraph said that from block 14,050,000 the network refuses to finalize any block without a post-quantum quorum; the per-block rule armed at that height is retired in the shipped code in favour of the anchor rules and changed no enforcement, so that sentence is withdrawn.) The anchor ships in this repository both as source, under `anchor/`, and as `patches/0003-aere-pq-anchor.patch`. A node built without it has not been shown to import headers past block 13,014,000: the second client needed an explicit change to accept the sixth element, and no floor-only build has been observed following the chain past that height. Apply `0001`, `0003`, `0004` and `0005` together and treat a build missing any of them as unable to follow the current chain. ## Patch 0005 exists because the import proof was actually attempted Measured 2026-08-15, on a real from-genesis sync of a build from patches `0001+0003+0004` alone: the node followed chain 2800 for 9.18 million blocks and stopped at block 9,189,161, the `futureEipsTime` activation, with `failed persisting block due to stateroot mismatch`. Not one cause but two, both in `MainnetProtocolSpecs.java`, both now carried by `patches/0005-aere-eip2935-futureeips.patch`: upstream bases the futureEips milestone on the unreleased amsterdam definition (Block Access Lists, a different state-root committer), while chain 2800 isolates it on Osaka; and the fleet activates EIP-2935 historical block hashes in that same fork, one system state write per block from 9,189,161 onward, which a build without the patch never performs. No amount of green unit tests found this; importing the real chain found it in one afternoon. **Measured 2026-08-16: the from-genesis sync reached the live tip.** A node built only from these packages imported chain 2800 from block 0 to height **14,088,211** and then followed the head, crossing the 14,050,000 activation height (which, see above, changed no enforcement) with zero anchor rejections. Two more things had to be true for that, both now carried by the patches and both described with their measured boundaries in `IMPORT-PROOF-STARE-2026-08-15.md`: a historical window (anchor heights 13,267,824 to 13,268,944) in which anchoring was deliberately disarmed fleet-wide, and a recovery window (13,268,976 to 13,890,544) in which proposers legitimately wrote shorter certificates. Inside those windows the header is accepted as carried; outside them nothing changes. The controls run in both directions (641 tests, 0 failures). Measured 2026-08-15: on a pristine `d2032017` checkout, `git apply` (no flags) accepted `0001`, `0003` and `0004` in that order, and `./gradlew --no-daemon installDist -x spotlessJavaCheck -x test` exited 0 on JDK 21, producing `besu/v26.8-develop-d203201/linux-x86_64/openjdk-java-21`. That proves the recipe builds. The import proof above, measured 2026-08-16, proves the build follows the live chain from genesis to the tip. The proof is repeated, not assumed: see `IMPORT-PROOF-STARE-2026-08-15.md` for the measured heights of each run. --- ## Start it ```bash besu \ --genesis-file=/path/to/aere-node/genesis.json \ --data-path=/path/to/data \ --network-id=2800 \ --sync-mode=FULL \ --data-storage-format=BONSAI \ --bootnodes= \ --p2p-port=30303 \ --rpc-http-enabled --rpc-http-port=8545 \ --rpc-http-api=ETH,NET,WEB3,QBFT \ --min-gas-price=0 ``` Bootnodes are deliberately NOT published in this repository yet. The network entry points available today are consensus or origin hosts, and this project does not print the addresses of its own machines in public documents; a dedicated public bootnode, on a host that serves nothing else, is the planned replacement, and this paragraph will then carry its enode. Until then, write to office@aere.network with the subject "bootnode" and you will receive a current enode by return. Everything else on this page works without one; discovery is the only step that needs it. `--sync-mode=FULL` is deliberate. Chain 2800 runs QBFT with a half second block period, so the head was about 12.2 million blocks when this was written (2026-08-03), passed 14.6 million on 2026-08-19, and climbs by roughly two per second; read the live height with eth_blockNumber. Full sync from block 0 is the mode that actually verifies the history we publish, which is the point of this repository. Snap sync against a QBFT chain trusts a peer for the state and verifies far less. `--min-gas-price=0` matches the network. Chain 2800 has a real 1 Gwei base fee from block 10,141,734, but the minimum gas price a node will accept into its own pool is a local policy and the Foundation nodes run it at zero. Outbound and inbound TCP and UDP on your p2p port must be open. Discovery is UDP; a TCP only firewall gives you a node that dials out and is never dialled back. --- ## Check that you are on the right chain, before you trust anything else Two facts settle it. Run these against your own node once it is up. **1. Your block 0 must be the network's block 0.** ```bash curl -s -X POST http://127.0.0.1:8545 -H 'content-type: application/json' \ -d '{"jsonrpc":"2.0","id":1,"method":"eth_getBlockByNumber","params":["0x0",false]}' \ | grep -o '"hash":"0x[0-9a-f]*"' ``` Expected, and this is the whole test: ``` 0xd86d57a899cbfa580669f0e1c7cd4ae5f525247c3c823f8f75df176a0c5d7f1a ``` That hash covers every consensus relevant field in `genesis.json`, including the state root of the six genesis accounts. If it matches, your genesis file is the network's genesis file and no further comparison of individual fields is needed. If it does not match, your node will never peer, and no amount of correct bootnodes will help. Compare against the public endpoints, which are separate machines with separate operators of the same file: ```bash curl -s -X POST https://rpc.aere.network -H 'content-type: application/json' \ -d '{"jsonrpc":"2.0","id":1,"method":"eth_getBlockByNumber","params":["0x0",false]}' curl -s -X POST https://rpc2.aere.network -H 'content-type: application/json' \ -d '{"jsonrpc":"2.0","id":1,"method":"eth_getBlockByNumber","params":["0x0",false]}' ``` **2. You must have peers.** ```bash curl -s -X POST http://127.0.0.1:8545 -H 'content-type: application/json' \ -d '{"jsonrpc":"2.0","id":1,"method":"net_peerCount","params":[]}' ``` A nonzero answer means discovery worked. Zero after a few minutes means either your UDP port is closed or the bootnode you were given is down; a plain TCP connect to its address distinguishes the two. --- ## What the two bootnodes are, and what they are not They are two full nodes that are **not** in the validator set. Chain 2800 seals blocks with nine QBFT validators (seven until 2026-08-09), and none of the nine is listed here, on purpose. Publishing a validator's p2p address hands an attacker a target whose downtime costs the network consensus headroom, which is why sentry style architectures exist. The two nodes above carry no consensus responsibility: if both are taken down, new nodes cannot bootstrap until they are replaced, and block production is unaffected. A written address is not a live address. This file cannot prove the bootnodes are up at the moment you read it; only your own `net_peerCount` can. Both were reachable and serving blocks when this file was written. Both are Foundation operated, so this is one operator's word for two addresses. That is a real centralisation fact about chain 2800 today and not a documentation gap. --- ## Measured, 2026-08-03 The recipe on this page was executed rather than written. A Besu node with an **empty data directory** was started from exactly this `genesis.json` and exactly these two bootnode URLs, on a machine that is not a validator, with `--sync-mode=FULL` and no static nodes, no other peer hints and no copied database. - Its own block 0 came out as `0xd86d57a899cbfa580669f0e1c7cd4ae5f525247c3c823f8f75df176a0c5d7f1a`, which is the live chain's block 0. That hash covers the state root, so the six accounts in `alloc` are the network's down to the last wei, and so is every header field in the file. - It reached **11 peers** knowing nothing but the two enode URLs above. - It imported from block 0 to **block 2,221,580** in about thirty minutes, with **zero** rejected blocks, which carries it through the sub-second block period change at roughly 2,137,652 and out the other side. The honest limits on that run, stated because they are the difference between this section and an advertisement: - It was stopped at ~2.2 million rather than carried to the head, so it never reached the precompile fork at 9,189,161 or the base fee floor at 10,141,734. **"Reaches the current head" is not measured.** - It ran the Foundation's build of the fork, not a build a third party made from `patches/`. That those patches build, and that the built precompiles answer the NIST vectors, is measured separately in `README.md`; that the two together sync to the head is not. - Nothing here proves the bootnodes will be up when you read this. --- ## A number in this file that the chain does not agree with `config.transitions.qbft[0].block` reads **2138451**. That is the height at which the file says the block period drops from one second to half a second. The chain says otherwise. Sampling header timestamps on the public endpoints puts the change just after **2,137,652**. Measured spans of twenty blocks: from 2,137,600 the twenty blocks take 20 s, from 2,137,656 they take 15 s, from 2,137,657 they take 12 s, and from 2,137,700 they take a flat 10 s, which is 500 ms a block and stays there through 2,138,400. The published 2138451 is roughly eight hundred blocks late and describes a boundary that is not in the data. It is published anyway, unaltered, because this file is the file the network runs and its value as evidence comes from being exactly that. Two things make the discrepancy harmless to you rather than merely tolerated: the field only governs how fast a proposer may seal, so it has no effect on a node that follows; and it was measured, on the sync run described above, that a node carrying this exact value imports the blocks either side of both numbers without rejecting one. Correcting it means editing a file on live validators, which is a change to running consensus infrastructure and is not made as a side effect of publishing a document. ## A note on the `comment` fields in `alloc` The six genesis accounts carry `comment` strings. No client reads them; they are not consensus data and they are inside the file only because they have always been. Two of them are wrong and are left uncorrected here rather than quietly edited, because this file is published byte for byte as the running nodes hold it: the dash characters are mangled, and the 1,400,000,000 AERE account is labelled "Mining Reserve" although chain 2800 has no mining and never has. It is the staking and emissions reserve. Correcting the text means editing a file on live nodes, which is a change to running infrastructure and is not made as a side effect of a documentation fix.